Milk-Cip
| •
|
The
complete Management system controls the washing of both cooling
tank and milking system. |
| •
|
Save
up to 70% of your washing water. |
| •
|
Save
up to 70% of your detergents. |
| •
|
Accurate
control of temperatures for milk and washing water. |
| • |
Automatic recording
of all data for milk cooling
and washing. |
Protects Nature
| •
|
Uses
less quantities of detergents. |
| •
|
Uses
less washing water. |
Protects Your Economy
| •
|
Less
use of detergents. |
| •
|
Less
use of washing water. |
| • |
Less
energy consumption for heating water. |
The Milk-Cip Controller
is a newly developed special computer designed to control and collect
data about:
| •
|
Cooling
function for milk cooling tanks. |
| •
|
Washing
of milk cooling tanks. |
| • |
Washing
of milking systems. |
The Milk-Cip system controls the cooling and washing system of the
milk production and replaces the control and washing system of the
cooling tank and the washing system of the milking system.
The controller is easy to programme:
| •
|
Only
access to programming if the correct password is inserted. |
| •
|
The
inserted settings, times, and temperatures in the cooling tank
are shown clearly in the display of the controller. |
| •
|
The
controller surveys functions of the connected system, collects
data, and reports about the function for the last 5 days with
2 daily washings. |
| •
|
The
function of the cooling tank and the washing systems is controlled
according to the wanted values for washing (times, temperatures,
washing routines) and for cooling and operation of agitator
(times, temperatures, washing routines by emptying the tank). |
Information about the functions is collected continuously, and can
be read and checked on the display of the controller. Alarms about
unintended incidents, missing cooling function, errors in the washing
program, etc. are shown automatically on the display of the controller,
and an external alarm may be connected. |
|
The Milk-Cip System
is constructed and delivered as a complete tested unit. Tanks for
washing water, pipe connections, and valves are made of stainless
steel, and the system is delivered complete with built-in automatic
valves, level sensors, thermostats, heat elements, general service
pump, dosoge pump and controller.
Milk-Cip Dosing System for Detergents
The dosage pump is a complete unit with hose pump, built-in
measuring electrodes, and processor for controlling the quantity
mixture of detergents. The dosage pump is a whole unit with display
and foil keyboard for programming the added quantity of detergents
and with alarm functions for: Missing detergent, hose leakage, etc.
During the washing
procedure the connected dosing unit continuously measures the conductivity
of the washing water. The conductivity is used for expressing the
concentration or contents of detergents or disinfectants of the
washing water, and the adding of extra detergent is controlled from
this concentration.
Save with Strangko Milk-Cip
| •
|
Shorter
working hours for cleaning the cooling tank and milking system. |
| •
|
Up to
70% water savings and thus reduced quantity of slurry. |
| • |
Up to
70% chemical savings and thus reduced environmental impact. |
| • |
Approx.
20% energy savings for consumption of electricity for heating
water and thus reduced environmental impact. |
| • |
We make
a reservation conc. cost saving equipment already installed. |
| • |
Savings
depend on the standard of reference. |
|
|
